Hybrid fractal acoustic metamaterials for low

Scientific Reports volume 12, Article number: 20444 (2022) Cite this article

1642 Accesses

1 Altmetric

Metrics details

The proposed work enumerates a hybrid thin, deep-subwavelength (2 cm) acoustic metamaterials acting as a completely new type of sound absorber, showing multiple broadband sound absorption effects. Based on the fractal distribution of Helmholtz resonator (HRs) structures, integrated with careful design and construct hybrid cross micro-perforated panel (CMPP) that demonstrate broad banding approximately one-octave low-frequency sound absorption behavior. To determine the sound absorption coefficient of this novel type of metamaterial, the equivalent impedance model for the fractal cavity and the micro-perforated Maa's model for CMPP are both used. We validate these novel material designs through numerical, theoretical, and experimental data. It is demonstrated that the material design possesses superior sound absorption which is primarily due to the frictional losses of the structure imposed on acoustic wave energy. The peaks of different sound absorption phenomena show tunability by adjusting the geometric parameters of the fractal structures like cavity thickness ‘t’, cross perforation diameter of micro perforated panel, etc. The fractal structures and their perforation panel are optimized dimensionally for maximum broadband sound absorption which is estimated numerically. This new kind of fractals cavity integrated with CMPP acoustic metamaterial has many applications as in multiple functional materials with broad-band absorption behavior etc.

Numerous uses for the deep-subwavelength thick broadband low-frequency sound absorber can be found in acoustic cloaking and noise reduction. An acoustic metamaterial is an excellent candidate to tackle all challenges with careful design of structures that may possess extraordinary acoustic properties like broadband noise absorption1,2,3,4,5, sound insulation6,7,8, noise cloaking properties9,10, acoustic jetting properties11 etc. Acoustic metamaterials are well known as artificial or man-made structures that may be programmed through negative effective density12,13, negative effective modulus14,15, and simultaneous negative modulus and density16,17,18. Researchers have recently proposed 2D fractals acoustic metamaterials19 and 3D labyrinthine fractal acoustic metamaterials20, which can possess multi-band sound blocking properties in the low frequency domain. Another broadband low frequency sound isolator is designed through a spider web-inspired membrane-type meta-material21. Researchers may seek to find the lightweight structures of different material designs to possess excellent sound absorption to solve challenges related to noise control22,23. Further, it has long been a challenge to get broadband sound absorption while keeping thin and light weightedness as structural properties. Metamaterial design like multi-coiled structures24, can achieve perfect absorption at extreme low frequency of 50 Hz with a thickness of 1.3 but cannot tune once it is fabricated. Researchers have also tried conventional micro-perforated panels (MPP)25,26,27,28, with back cavity, Cascade neck-embedded Helmholtz resonators based metamaterials29, MPP with neck-embedded Helmholtz resonator30, and successfully achieved an overall good sound absorption level at low frequencies. However, the thickness of the backing cavity is usually more than 5 cm for obtaining a broadband sound absorption behavior. Ultrathin membrane metamaterials (MM)31,32, are a very good candidate for broadband sound absorption behavior but the problem in MM is membrane loosening effect which may come in due course of time after repeated use.

This article has developed a new type of tunable micro-perforated face-sheet design (with perforation diameter ≤ 1 mm) backed up by fractal geometry as shown in Fig. 1, of subwavelength dimensions that demonstrate excellent broadband sound absorption behavior. The thickness of this classical metamaterial design is less than 2 cm, and it can be easily programmed/tuned according to the industrial need and scope in different fields.

(a) Schematic of cross perforated fractal structure hybrid metamaterials panel composed of a cross-micro-perforated top face-sheet, a Helmholtz swastika fractals structure as core, and a back plate as bottom face-sheet. (b) One unit cell, sidewall cut-off vertically to see details inside. (c) CMPP with different perforation sizes in direction one having perforation diameter d1 and direction two is d2 and the back fractals cavity. Courtesy (ANSYS 17.045).

The series–parallel circuit analogy is applied to obtain an equivalent impedance method through which a theory is proposed, to calculate the sound absorption coefficient is established for this new class of fractal designs. This works also experimentally validates and compares with the theoretical model and a finite element model. Perfect sound absorption is achieved around 1000 Hz, together with broadband sound absorption starting from 400 to 1600 Hz, when the thickness of these unique metamaterials is about 20 mm. Almost perfect sound absorption has been found around 1000 Hz, together with one-octave relative absorption bandwidth starting from 600 Hz, when the thickness of the metamaterials is just 20 mm with the integration of two-unit cells. We have also integrated the four-unit cells to achieve broadband sound absorption and successfully achieved 61% higher relative bandwidth and sound absorption coefficient greater than 80%.

The proposed acoustic metamaterial having two face-sheet and a swastika fractal structure core, as shown in Fig. 1. The cad model of the proposed metastructre is design in Design Modeler of ANSYS 17.045. The top face-sheet consist of cross perforation having uniform perforation diameter in direction ‘1’ (d1) and direction ‘2’ as (d2), in a micro-perforated panel (CMPP). The unique Helmholtz resonators are fractally distributed and act as an acoustic cavity core with the bottom face-sheet in the shape of a rigid backing plate. The fractal core is designed based on novel fractal shapes and contains multiple Helmholtz resonators along the arms of the fractal shape. In the first level branches, the unit shape (side branched Helmholtz resonator) is rotated by \(90^\circ ,180^\circ \, \mathrm{and} \, 270^\circ\) respectively to create four arms of the fractal structure and interconnected in a crossroad like manner. As the Helmholtz arm iterates ‘n’ times to a scaled down geometry connected to the base arm (Helmholtz resonators) at every 90°. Rotation angle a scale factor of 0.6 is used for every iteration. The final acoustic meta-structure up to which we investigate corresponds to an "n" value of 3 and the final core structure shown in Fig. 1c.

In general, the absorption coefficient of any acoustic metamaterials with a rigidly backed panel can be estimated through its impedance as

where, \({z}_{s}\) is known as the surface impedance of the acoustic absorber. \({z}_{0}={\rho }_{0}{c}_{0}\) is the characteristic impedance where \({\rho }_{0}\) and \({c}_{0}\) are mass density and sound speed in air, respectively. The surface impedance of the proposed fractal CMPP have been calculated as:

where, \({z}_{Mp}\) and \({z}_{fc}\) are the acoustic impedance of the CMPP and the fractal structure containing cavity, respectively.

The impedance of the side branch resonator Zr at X1 as shown in Fig. 1b in Supplementary Materials, is expressed as33,34,35

where Zc = \(\rho c/{s}_{c}\) represents the impedance of the helmholtz cavity and Zh represents the neck impedance of the resonators as suggested by Seo et al.33. \(l\) is the neck length, \({s}_{c}\) is the cross sectional area of the cavity, \(h\) is the height of the cavity. here \(k=2\pi f/c\) is the wave number.

‘Sh’ is the cross- sectional area of the neck region. We first calculated the equivalent impedance of the fractals cavity \({z}_{fc}\) through an electrical analogy (see Supplementary Material for more details).

Impedance of the micro-perforated plate can be calculated by Maa's Model36,37

where

and

where \(\varnothing =\) Porosity, \(\eta\) = dynamic viscosity, \(\alpha\) = perforation constant, d = diameter of hole, t = thickness of the perforated plate, \(x=d\sqrt{\frac{\omega {\rho }_{0}}{4 \eta }}.\)

We can now calculate the total impedance of the cross perforated plate of single unit as

where \(zm1\) is the impedance of the CMPP in direction 1 and \(zm2\) is the impedance of the perforation in direction 2 as shown in Fig. 1c.

We are thus enabled to put the Eqs. (8) and (13) (Supplementary Material) as inputs to the Eq. (2) and we can thereby theoretically calculate the sound absorption coefficient of the cross micro-perforated fractal acoustic metamaterials with the help of Eq. (1). The absorption coefficient spectrum of the theoretical model is obtained by using MATLAB (R2016a)46.

Figure 2 depicts the broadband sound absorption in this case. As we can observe clearly that the initial peak of the absorption coefficient of the experimental result is not seen in the FEM simulation values, and similarly the last peak is not seen in the theoretical model. Although the experimental, theoretical, and numerical results have good consistency in terms of the amplitude at maximum absorption etc., in theoretical models, the linear superposition principle has been used as shown in Eq. (8). Thus, the nonlinear coupling effect of the perforation and cavity of the two distinctly truncated acoustic signals passing from the two different diameter holes on the cover plate is not considered while determining the theoretical spectrum. In numerical simulations, the CMPP has been assumed to be equivalent to a porous rigid body, and the visco-thermal losses across the fractal core has been considered to be negligiblemal38,39,40,41. Thus the first absorption peak as is distinctly observed in experimental data as well as theoretical prediction does not show up in the simulation data. It also observed that the experimental frequency bandwidth is wider than numerical and theoretical prediction due to additional loss of acoustic energy around the rough surface created by 3D printing42,43. A near-perfect absorption peak occurs around 1000 Hz with relative bandwidth of 50% for parameters d1 = 0.5 mm and d2 = 1 mm and has a porosity \({\mathrm{\o }}_{1}\) = 4.91% and \({\mathrm{\o }}_{2}\) = 19.63%, respectively. Here the relative bandwidth is calculated as the ratio of the full width at half the maximum of the absorption coefficient to the resonance frequency. There are two high absorption peaks corresponding to > 0.8 absorption coefficient at 700 Hz and > 0.95 absorption coefficient at 1000 Hz. The small differences in the results of the FEM and theoretical predictions occur due to neglecting the thermal dissipation at the perforation region and considering only viscous energy dissipation.

Sound absorption coefficient of CMPP predicted by the analytical method, FEM model and experimental results. Courtesy (MATLAB R2016a)46.

We start by varying the thickness of the CMPP fractal acoustic metamaterial to achieve varying sound absorption values in the lower frequency range. Given specific values of fixed cross perforation parameter (d1, d2) and porosity of \({\varnothing }_{1}\) and \({\varnothing }_{2}\) Variable fractal core thickness of ‘t’ the sound absorption bandwidth is obtained at a particular frequency, as shown in Fig. 3a.

Sound absorption coefficient of CMPP with different acoustic parameters. (a) Thickness of the fractals core. (b,c) Porosity of CMPP. Courtesy (MATLAB R2016a)46.

As the thickness ‘t’ of the fractal core increases, the sound absorption curve gradually shifts from high to low frequency at fixed perforation parameters d1 = 0.5 mm and d2 = 1 mm, respectively. A near-perfect sound absorption peak (96.66%) is obtained at 800 Hz with a relative absorption bandwidth of 50% when t = 30 mm. Similarly, 95.55% sound absorption at 850 Hz, 1150 Hz, 1100 Hz, and 1200 Hz with relative bandwidth (α > 0.5) of 50%, 30%, 29% and 27.6% is obtained as the thickness "t" becomes = 24 mm, 14 mm, 12 mm and 10 mm respectively.

We have also investigated the effect of cross porosity variation on the broadband sound absorption spectra. In the first sample, A1 we have created a geometry corresponding to d1 = 0.3 mm, \({\varnothing }_{1}\) = 7.07% and d2 = 0.4 mm, \({\varnothing }_{2}\) = 12.56%. Similarly, in the second sample A2, the geometrical parameters are changed to d1 = 0.5 mm, \({\varnothing }_{1}\) = 19.63% and d2 = 0.6 mm, \({\varnothing }_{2}\) = 28.26%, in the third sample A3 the parameters are d1 = 0.7 mm, \({\varnothing }_{1}\) = 38.46% and d2 = 0.8 mm, \({\varnothing }_{2}\) = 50.24%, and in the fourth sample, A4, the parameters are changed to d1 = 0.9 mm, \({\varnothing }_{1}\) = 63.59% and d2 = 1 mm, \({\varnothing }_{2}\) = 78.5% respectively. Further other four samples with different porosity combination (A5 to A8) with fractals core have been investigated and their acoustic behavior as shown in Fig. 3c.

The samples are investigated with fixed fractal thickness t = 20 mm. The sample ‘A1’ shows the maximum sound absorption peak (91.2%) to be at 950 Hz with relative bandwidth 58%. Similarly, for the sample A2 and A3 we obtain a similar behavior although as the cross-porosity ratio is increased the resonance frequency is shifted towards the right as shown in Fig. 3b. The sample A4 shows a relatively lower value of 65% absorption at the maximum perforation (details shown in Table 1). The two samples A1 and A5 shows the higher relative bandwidth of sound absorption with maximum sound absorption of 91% and 95%. So, we can tune the novel sound absorbers with a combination of different cross perforation diameters (≤ 1 mm) in each unit cell. For brevity, we have only shown eight combinations here as shown in Fig. 3b,c.

In order to expand the relative absorption bandwidth, we have further integrated two-unit cells with different cross porosities into one resonator as shown in Fig. 4b. Unit 1 and unit 2 have the same thickness and fractals cores but with different top CMPP geometries having perforation diameter d1, d2 of unit 1 and d3 and d4 for unit 2. We have also investigated a core containing a pair of unit cells integrated to CMPP and developed six samples S1, S2, S3, S4, S5 and S6 with different geometrical parameters having various combinations of perforation diameters (d1, d2 and d3, d4) and porosity ratios (\({\varphi }_{1}\), \({\varphi }_{2}\), \({\varphi }_{3}\) and \({\varphi }_{4})\) (Details in Table 2).

Two-unit cells with different cross perforation. (a) Sound absorption coefficient of combined two-unit cells with different cross porosity. (b) Top view of the samples of two-unit cells. Courtesy (ANSYS 17.045 and MATLAB R2016a46).

Sample S1, shows higher sound absorption coefficient (92%) at 1000 Hz and 60% relative bandwidth, sample S2 has a 76% absorption coefficient with approximately one-octave sound absorption bandwidth, t thickness 20 mm as shown in Fig. 4a. All the samples show broader relative sound absorption bandwidth within the range 39–76% and the approach shown here demonstrates the ability to customize the sound absorption bandwidth as per requirements by careful consideration of the correct combination of the core with various CMPP geometries.

We have further integrated 4 different unit cells reported in Fig. 5b, to get a broader sound absorption response from these geometries. The porosity of the cross MPPs is optimized numerically to get suitable combinations to achieve a maximized sound absorption bandwidth. The perforation dimensions are d1 = 0.3 mm, d2 = 0.4 mm, d3 = 0.5 mm, d4 = 0.6 mm, d5 = 0.7 mm, d6 = 0.8 mm, d7 = 0.9 mm and d8 = 1 mm.

Four-unit cells with different cross perforation. (a) Sound absorption coefficient of combined four-unit cells with different cross porosity. (b) Top view of the samples of four-unit cells. Courtesy (ANSYS 17.045 and MATLAB R2016a46).

As we can see from the Fig. 5a that the sound absorption bandwidth from 800 to 1400 Hz demonstrates an absorption coefficient of greater than 80% and the average relative bandwidth of 61%.

Effective and efficient Attenuation of noise requires limited thickness, light weightiness and perfect sound absorption performance in broadband frequencies, especially in the lower frequency range. We have proposed a novel class of cross micro-perforated hybrid acoustic metamaterial with Helmholtz fractal cores that possess outstanding sound absorption over broadband low frequency range with excellent tunability. Using electrical analogy methods the equivalent impedance to sound propagation within the fractal core is evaluated in combination with the classical improved Maa Model25, for the CMPPs. We have developed a theoretical approach to calculate the equivalent sound absorption coefficient for a bunch of geometric combinations. This theory is then validated through a numerical approach (FEM) as well as experimentally. The results show that novel sound absorbers 20 mm thickness can achieve near perfect absorption around 1000 Hz, with a broadband absorption bandwidth. Approximately 1 octave band sound absorption coefficient > 0.5 have been achieved with single unit cell and more than 0.8 has been achieved within the frequency range 600–1100 Hz. Maximum relative sound absorption bandwidth of 76% has been achieved with an integrated two unit cell configuration and 61% with 4 unit cell combination. The sound absorption coefficient has been increased by integrating the unit cells.

The sound absorption coefficient of CMPP is carried out using ANSYS 17.044, with its acoustic module. We have approached the problem by first converting the MPPs into rigid porous materials and used equivalent fluid model in numerical analysis FEM simulation to obtain the final estimate (Fig. 6). The equivalent fluid cad model of CMPPs as shown in Fig. 7b.

Equivalent fluid model conversion of MPP to rigid porous materials using the parameters of Ø, σ, η, Λ and Λʹ.

FEM simulation setup to analyze the sound absorption coefficient. (a) Simulation setup. (b) Equivalent fluid model of proposed CMPP fractals acoustic metamaterials. Courtesy (ANSYS 17.045).

The equivalent fluid model is defined with the parameters that can be calculated by the Eqs. (9) to (11). These calculated values have been used in FEM simulations as shown in Fig. 7 below.

where \(\tau\) is dynamic viscosity and \(d\) is the diameter of the perforation

where \(r\) is the radius of the perforation and t is the thickness of the CMPP.

The 3D model of CMPP acoustic metamaterials shown in Fig. 7a created in the DesignModeler of ANSYS 17.045. A plane wave with unit amplitude is applied normally and hard boundary conditions is applied on all the walls of the interface between air and the surface at the subsurface levels of the structure.

The datasets generated during and/or analyzed during the current study are available from the corresponding author on reasonable request.

The FEM simulations were performed using ANSYS 17 (Academic)45 and for plotting of all the graph, and theoretical coding, used MATLAB (R2016a)46 (License No. 40765629). The code is available from ([email protected]) on reasonable request.

Christensen, J. & Willatzen, M. Acoustic wave propagation and stochastic effects in metamaterial absorbers. Appl. Phys. Lett. 105, 043508 (2014).

Article Google Scholar

Duan, Y. et al. Theoretical requirements for broadband perfect absorption of acoustic waves by ultra-thin elastic meta-films. Sci. Rep. 5, 1–9 (2015).

Article CAS Google Scholar

Christensen, J. et al. Extraordinary absorption of sound in porous lamella-crystals. Sci. Rep. 4, 1–5 (2014).

MathSciNet Google Scholar

Mei, J. et al. Dark acoustic metamaterials as super absorbers for low-frequency sound. Nat. Commun. 3, 756–757 (2012).

Article PubMed Google Scholar

Bhattacharya, S. et al. Ashok chakra-structured meta-structure as a perfect sound absorber for broadband low-frequency sound. Appl. Phys. Lett. 117, 191901 (2020).

Article CAS Google Scholar

D’Aguanno, G. et al. Broadband metamaterial for nonresonant matching of acoustic waves. Sci. Rep. 2, 1–5 (2012).

Article Google Scholar

Fan, L. et al. An acoustic metamaterial composed of multi-layer membrane-coated perforated plates for low-frequency sound insulation. Appl. Phys. Lett. 106, 151908 (2015).

Article Google Scholar

Xu, C. et al. Study on broadband low-frequency sound insulation of multi-channel resonator acoustic metamaterials Study on broadband low-frequency sound insulation of multi-channel resonator acoustic metamaterials. AIP Adv. 11, 045321 (2021).

Article Google Scholar

Basiri, Z., Fakheri, M. H., Abdolali, A. & Shen, C. Non-closed acoustic cloaking devices enabled by sequential—Step linear coordinate transformations. Sci. Rep. https://doi.org/10.1038/s41598-021-81331-3 (2021).

Article PubMed PubMed Central Google Scholar

Xue, Y. & Zhang, X. Self-adaptive acoustic cloak enabled by soft mechanical metamaterials. Extrem. Mech. Lett. 46, 101347 (2021).

Article Google Scholar

Lu, C. et al. GRIN metamaterial generalized Luneburg lens for ultra-long acoustic jet. Appl. Phys. Lett. 118(14), 144103 (2021).

Article CAS Google Scholar

Hyeon, S., Mahn, C., Mun, Y., Guo, Z. & Koo, C. Acoustic metamaterial with negative density. Phys. Lett. A 373, 4464–4469 (2009).

Article Google Scholar

Access, O. Wave attenuation mechanism in an acoustic metamaterial with negative effective mass density. New J. Phys. https://doi.org/10.1088/1367-2630/11/1/013003 (2009).

Article Google Scholar

Fang, N., Xi, D., Xu, J., Ambati, M. & Srituravanich, W. Ultrasonic metamaterials with negative modulus. Nat. Mater. 5, 452 (2006).

Article PubMed CAS Google Scholar

Garc, V. M. Quasi-two-dimensional acoustic metamaterial with negative bulk modulus. Phys. Rev. B 85, 184102 (2012).

Article Google Scholar

Lee, S. H., Park, C. M., Seo, Y. M., Wang, Z. G. & Kim, C. K. Composite acoustic medium with simultaneously negative density and modulus. Phys. Rev. Lett. 104, 054301 (2010).

Article PubMed Google Scholar

Kousis, I. & Pisello, A. L. Double-negative acoustic metamaterials based on quasi-two-dimensional fluid-like shells. New J. Phys. https://doi.org/10.1088/1367-2630/14/10/103052 (2012).

Article Google Scholar

Kumar, S., Bhushan, P., Prakash, O. & Bhattacharya, S. Double negative acoustic metastructure for attenuation of acoustic emissions. Appl. Phys. Lett. 112, 101905 (2018).

Article Google Scholar

Singh, S. K., Prakash, O. & Bhattacharya, S. Novel fractal acoustic metamaterials (FAMs) for multiple narrow-band near-perfect absorption. J. Appl. Phys. 132(3), 035105 (2022).

Article CAS Google Scholar

Man, X. et al. Engineering three-dimensional labyrinthine fractal acoustic metamaterials with low-frequency multi-band sound suppression. J. Acoust. Soc. Am. 149, 308–319 (2021).

Article PubMed Google Scholar

Sound, B. L. et al. Spider Web-Inspired Lightweight Membrane-Type Acoustic, 1–17 (2021).

Li, Y. et al. Sound absorption characteristics of aluminum foam with spherical cells. J. Appl. Phys. 110(11), 113525 (2011).

Article Google Scholar

Delany, M. E. & Bazley, E. N. Acoustical properties of fibrous absorbent materials. Appl. Acoust. 3(2), 105–116 (1970).

Article Google Scholar

Phys, A., Zhu, Y. & Fan, S. Extreme low-frequency ultrathin acoustic absorbing metasurface. Appl. Phys. Lett. 115, 173506 (2019).

Article Google Scholar

Maa, D. Potential of microperforated panel absorber. J. Acoust. Soc. Am. 104, 2861–2866 (2014).

Article Google Scholar

Wang, C. & Huang, L. On the acoustic properties of parallel arrangement of multiple micro-perforated panel absorbers with different cavity depths. J. Acoust. Soc. Am. 130, 208 (2015).

Article Google Scholar

Stinson, M. R. The propagation of plane sound waves in narrow and wide circular tubes, and generalization to uniform tubes of arbitrary cross-sectional shape. J. Acoust. Soc. Am. 89, 550–558 (1991).

Article Google Scholar

Sakagami, K., Nakamori, T., Morimoto, M. & Yairi, M. Double-leaf microperforated panel space absorbers: A revised theory and detailed analysis. Appl. Acoust. 70, 703–709 (2009).

Article Google Scholar

Zhou, Z., Huang, S., Li, D. & Jie Zhu, Y. L. Broadband impedance modulation via non-local acoustic metamaterials. Natl. Sci. Rev. https://doi.org/10.1201/9781315366784 (2021).

Article PubMed PubMed Central Google Scholar

Huang, S. et al. Compact broadband acoustic sink with coherently coupled weak resonances. Sci. Bull. 65, 373–379 (2020).

Article Google Scholar

Xu, Q., Qiao, J., Sun, J., Zhang, G. & Li, L. A tunable massless membrane metamaterial for perfect and low-frequency sound absorption. J. Sound Vib. 493, 115823 (2021).

Article Google Scholar

Nguyen, H. et al. A broadband acoustic panel based on double-layer membrane-type metamaterials. Appl. Phys. Lett. 118, 184101 (2021).

Article CAS Google Scholar

Seo, S.-H. & Kim, Y.-H. Silencer design by using array resonators for low-frequency band noise reduction. J. Acoust. Soc. Am. 118, 2332–2338 (2005).

Article Google Scholar

Sullivan, J. W. & Crocker, M. J. Analysis of concentric-tube resonators having unpartitioned cavities. J. Acoust. Soc. Am. 64, 207–215 (1978).

Article MATH Google Scholar

Sullivan, J. W. A method for modeling perforated tube muffler components. I. Theory. J. Acoust. Soc. Am. 66, 772–778 (1979).

Article MATH Google Scholar

You, A., Be, M. A. Y. & In, I. Potential of Microperforated Panel Absorber, Vol. 2861 (2016).

Bolton, J. S. & Hou, K. Finite Element Models of Micro-Perforated Panels (Purdue University, 2009).

Google Scholar

Molerón, M., Serra-Garcia, M. & Daraio, C. Visco-thermal effects in acoustic metamaterials: From total transmission to total reflection and high absorption. New J. Phys. 18, 033003 (2016).

Article Google Scholar

Henríquez, V. C., García-Chocano, V. M. & Sánchez-Dehesa, J. Viscothermal losses in double-negative acoustic metamaterials. Phys. Rev. Appl. 8, 1–12 (2017).

Article Google Scholar

Xiang, X. et al. Ultra-open ventilated metamaterial absorbers for sound-silencing applications in environment with free air flows. Extrem. Mech. Lett. 39, 100786 (2020).

Article Google Scholar

Zhao, X., Liu, G., Zhang, C., Xia, D. & Lu, Z. Fractal acoustic metamaterials for transformer noise reduction. Appl. Phys. Lett. 113, 074101 (2018).

Article Google Scholar

Bontozoglou, V. & Papapolymerou, G. Laminar film flow down a wavy incline. Int. J. Multiph. Flow 23, 69–79 (1997).

Article MATH CAS Google Scholar

Kandlikar, S. G., Schmitt, D., Carrano, A. L. & Taylor, J. B. Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels. Phys. Fluids 17, 100606 (2005).

Article MATH Google Scholar

Howard, C. Q. & Cazzolato, B. S. and ANSYS.

ANSYS (Acoustics V4), V. 17.0. www.ansys.com/en-in (ANSYS). Accessed 20 June 2020.

MATLAB (Programming Language), V. R2016a. www.mathworks.com/products/matlab.html (MATLAB). Accessed 11 Feb 2020.

Download references

The funding was provided by Boeing International Corporation India private limited (Grant No. BOEING/ME/2016081).

Department of Design, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, 208016, India

Sanjeet Kumar Singh & Shantanu Bhattacharya

Microsystem Fabrication Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Kanpur, Kanpur, Uttar Pradesh, 208016, India

Shantanu Bhattacharya

Boeing International Corporation India Private Limited, RMZ Infinity, Tower D, 5th Floor, Old Madras Road, Bengaluru, Karnataka, 560001, India

Om Prakash

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

S.K.S.: Designed the study, conducted the experiments, analyzed the data, contributed to the theoretical derivation, conducted numerical analysis and co-drafted the manuscripts with O.P. and S.B. O.P.: Provided technical guidance to fulfill project goals and also provided financial support in carrying out experimentation and reviewing the finalized manuscript. S.B.: Conceived the central idea of fractal meta-structures, offered guidance in the process of decision making during iterative designing analysis and experimentation, provided infrastructural support, valuable intellectual insights, and manuscript finalization. All work was carried at Microsystem Fabrication Lab, IIT Kanpur.

Correspondence to Shantanu Bhattacharya.

The authors declare no competing interests.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

Singh, S.K., Prakash, O. & Bhattacharya, S. Hybrid fractal acoustic metamaterials for low-frequency sound absorber based on cross mixed micro-perforated panel mounted over the fractals structure cavity. Sci Rep 12, 20444 (2022). https://doi.org/10.1038/s41598-022-24621-8

Download citation

Received: 23 April 2022

Accepted: 17 November 2022

Published: 28 November 2022

DOI: https://doi.org/10.1038/s41598-022-24621-8

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.